DMT0D6/6060/KHHighway D400 manhole cover 600mm x 600mm clear opening with 150mm frame depth
SpecificationGeneral information
Standards, classes and groupings
Dimensions
Accessories
NotesAll values stated are nominal within 2.5% tolerance.Knowledge baseKnowledge Base / Access solutions / Standards and conformity National Highways skid resistance requirements CD 534 v0.1.0 contains changes to skid resistance test requirements that are now based on a WRc test method for BS EN 124-conforming coarse textured cover surfaces. This article guides you through the test and Wrekin's conformance. Knowledge Base / Access solutions / Standards and conformity Understanding BS EN 124 groups and classes BS EN 124:2015 divides access covers and gully grates into a number of classes by static test load. It also categorises the various places where they may be installed from Group 1 through to Group 6. This article will guide you through the groups and classes. Knowledge Base / Access solutions / Standards and conformity Sewers for adoption Sewers for Adoption (7th edition) contains guidance for the design and construction of sewers that will be adopted by Sewerage Undertakers in England and Wales in accordance with Section 104 of the Water Industry Act 1991. This helpful guide will take you through what you need to know. Knowledge Base / Access solutions / Product guidance ID badging and communication options (RFID, NFC, IoT) A large number of our Unite and Highway covers provide the facility for a retrofittable badge to be installed in the cover, without the need for welding. In addition, this location can also be used to install communications antennas within the cover, removing the need to adjust the surrounding road surface. This article discusses the potential applications of this technology. Knowledge Base / Access solutions / Product guidance On-site coating of ductile cast iron parts Where the loss of barrier coatings has occurred, usually through trafficking and/or light corrosion, a site-applied paint coating may be successfully brush-applied to refresh the surface finish of ductile iron parts. 1. Wrekin Products Ltd is continually seeking to improve our products and therefore reserves the right to alter product specifications without prior notice. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||